manufacturer category series package voltage class rev . date ecliptek corp. oscillator ep13 14 pin dip 3.3v os44 08/03 ep13 series ? epo? programmable oscillators 3.3v supply voltage 14 pin dip package hcmos output stability to 50ppm custom lead length, gull wing options available oscillator ep13 electrical specifications 1.000mhz to 106.250mhz -20c to 70c or -40c to 85c -55c to 125c 3.3v dc 0.3v dc 28ma maximum (unloaded) 16ma maximum (pin 1=ground) 20a maximum (pin 1=ground) 100ppm or 50ppm maximum v dd -0.4v dc minimum i oh =-8ma 0.4v dc maximum i ol =+8ma 4 nseconds maximum 50 10(%) (standard) 50 5(%) (optional) 30pf hcmos load maximum 15pf hcmos load maximum tri-state power down enables output disable output: high impedance disable output: logic low 5ppm / year maximum 10 mseconds maximum 250psec max, 100psec typical 125psec max, 75psec typical 50pseconds maximum 40pseconds maximum frequency range operating temperature range storage temperature range supply voltage (v dd ) input current disable current (ts option) standby current (pd option) frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability output control function output control function input voltage aging (at 25c) start up time period jitter: absolute period jitter: one sigma inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration w/hcmos load w/hcmos load 20% to 80% of waveform w/hcmos load at 50% of waveform w/hcmos load at 50% of waveform w/hcmos load (<50.000mhz only) <50.000mhz >50.000mhz t s pd v ih : no connection or >70% of v dd v il : (ts option) <20% of v dd v il : (pd option) <20% of v dd <33.000mhz >33.000mhz <33.000mhz >33.000mhz 800-ecliptek www.ecliptek.com for latest revision 68 specifications subject to change without notice. h 5.08 w 20.8 l 13.2
ecliptek corp. oscillator ep13 14 pin dip 3.3v os44 08/03 manufacturer category series package voltage class rev . date ep13 00 et t ts - 24.000m - cl125 part numbering guide notes _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________________ _____________________________ mechanical dimensions all dimensions in millimeters environmental/mechanical specifications marking specifications line 1: ecliptek line 2: ep13 ts output control function pd = power down ts = tri-state enable high series designator line 3: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 4: xx y zz week of year last digit of year ecliptek manufacturing identifier note: pin 1 shall be designated with a dot pin 1: tri-state or power down pin 7: ground/case ground pin 8: output pin 14: supply voltage 800-ecliptek www.ecliptek.com for latest revision 69 specifications subject to change without notice. available options blank=none (standard) clxxx=custom lead length (see page 133) g=full size gull wing (see page 132) frequency output control function ts=tri-state, pd=power down frequency tolerance / stability 00=100ppm maximum (standard) 45=50ppm maximum operating temp. range blank=-20c to 70c or et=-40c to 85c duty cycle blank=50 10(%) (standard), t=50 5(%) characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a lead integrity mil-std-883, method 2004 solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-883, method 210 resistance to solvents mil-std-883, method 215
manufacturer category series package voltage class rev . date ecliptek corp. oscillator ep13 8 pin dip 3.3v os45 08/03 ep13 series ? epo? programmable oscillators 3.3v supply voltage 8 pin dip package hcmos output stability to 50ppm custom lead length, gull wing options available oscillator ep13 800-ecliptek www.ecliptek.com for latest revision 70 specifications subject to change without notice. h 5.6 l 13.2 w 13.2 electrical specifications 1.000mhz to 106.250mhz -20c to 70c or -40c to 85c -55c to 125c 3.3v dc 0.3v dc 28ma maximum (unloaded) 16ma maximum (pin 1=ground) 20a maximum (pin 1=ground) 100ppm or 50ppm maximum v dd -0.4v dc minimum i oh =-8ma 0.4v dc maximum i ol =+8ma 4 nseconds maximum 50 10(%) (standard) 50 5(%) (optional) 30pf hcmos load maximum 15pf hcmos load maximum tri-state power down enables output disable output: high impedance disable output: logic low 5ppm / year maximum 10 mseconds maximum 250psec max, 100psec typical 125psec max, 75psec typical 50pseconds maximum 40pseconds maximum frequency range operating temperature range storage temperature range supply voltage (v dd ) input current disable current (ts option) standby current (pd option) frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability output control function output control function input voltage aging (at 25c) start up time period jitter: absolute period jitter: one sigma inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, first year aging at 25c, shock, and vibration w/hcmos load w/hcmos load 20% to 80% of waveform w/hcmos load at 50% of waveform w/hcmos load at 50% of waveform w/hcmos load (<50.000mhz only) <50.000mhz >50.000mhz t s pd v ih : no connection or >70% of v dd v il : (ts option) <20% of v dd v il : (pd option) <20% of v dd <33.000mhz >33.000mhz <33.000mhz >33.000mhz
ep13 00 hs et t ts - 24.000m - cl125 tr frequency tolerance / stability 00=100ppm maximum (standard) 45=50ppm maximum package hs=half size 8 pin dip operating temp. range blank=-20c to 70c or et=-40c to 85c duty cycle blank=50 10(%) (standard), t=50 5(%) packaging options blank=bulk (standard) tr=tape & reel (only offered with half size g and half size g2 options) available options blank=none (standard) clxxx=custom lead length (see page 133) g=half size gull wing (see page 132) g2=half size gull wing (see page 132) frequency output control function ts=tri-state, pd=power down part numbering guide manufacturer category series package voltage class rev . date ecliptek corp. oscillator ep13 8 pin dip 3.3v os45 08/03 mechanical dimensions all dimensions in millimeters tape and reel dimensions all dimensions in millimeters environmental/mechanical specifications line 1: ecliptek line 2: ep13 ts output control function pd = power down ts = tri-state enable high series designator line 3: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 4: xx y zz week of year last digit of year ecliptek manufacturing identifier note: pin 1 shall be designated with a dot marking specifications 250 pieces per reel compliant to eia-481a pin 1 locator for gull wing (1) for ?g? option (2)for ?g2? option pin 1: tri-state or power down pin 4: ground/case ground pin 5: output pin 8: supply voltage 800-ecliptek www.ecliptek.com for latest revision 71 specifications subject to change without notice. characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a lead integrity mil-std-883, method 2004 solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-883, method 210 resistance to solvents mil-std-883, method 215
|
